Distribution and analysis of subacromial spurs and the relationship with acromial classification and angle in healthy individuals.

BACKGROUND: Subacromial spurs are considered the one of the pathology underlying shoulder impingement syndrome. Furthermore, few studies have focused on the morphology of the subacromial spurs in normal Chinese people. This study aimed to study the spur distribution and to illustrate the morphology of spurs, which may help guide the extent of acromioplasty. METHODS: A total of 93 normal individuals were enrolled, and both shoulders of all enrolled individuals were analyzed. The subjects were divided and classified into three different groups by ages: group I = 18-40 years, group II = 41-60 years, and group III ≥ 61 years. The osteophyte distribution, osteophyte area, subacromial surface area and osteophyte area/subacromial surface area ratio were measured and illustrated using Mimics and 3-matic software. The shape of the acromion was classified according to the Bigliani and Morrison classification system. The acromial angle was also classified. Then, the relationship between osteophytes, acromial classification and acromial angle was analyzed. RESULTS: Type II (curved shape) was the most common type of acromion, and the hooked shape was a rare form. A significant increase in the left subacromial surface area in males was observed in group III compared with group I (P < 0.001) and group II (P = 0.004). The total spur/subacromial area ratio was significantly higher in group II than I. An obvious increase in the right subacromial area was observed in group III compared with group I (P = 0.004). Furthermore, there was a significant increase in the right spur area (P = 0.021) and total spur/subacromial area ratio (P = 0.006) in females in group II compared with group I. Fewer spurs were observed on the left than on the right side (p = 0.0482). One spur was most common among type II acromions (29/36) (80.56%) on the left side and the right side (34/52, 65.38%). CONCLUSIONS: Spurs osteophytes are mainly distributed with an irregular shape and mostly run through the medial and lateral sides of the subacromial surface in normal subjects. The characteristics of subacromial spurs are so diverse that a surgeon must conduct subacromial decompression completely based on the morphology of individual spurs.

The Association between SLAP Lesions and Critical Shoulder Angle and Glenoid Depth.

PURPOSE OF THE STUDY: The critical shoulder angle (CSA) is formed by the combination of glenoid inclination and acromial index and has been shown related to rotator cuff tears and glenohumeral osteoarthritis. SLAP lesions today have an important place among bicipitolabral pathologies that cause intensive shoulder pain. We aimed to investigate the relationship between CSA and glenoid depth and SLAP lesions. MATERIAL AND METHODS: Between March 2017 and January 2022, 279 consecutive shoulder arthroscopy patients' MRI images were retrospectively examined. After the exclusion criteria, 191 patients were eligible. Patients with SLAP lesions (n=37) were assembled as the study group (Group 1), and patients with intact superior labrum (n=154) were named as the control group (Group 2). Critical shoulder angle (CSA) and glenoid depth measurements were performed using the preoperative MRI images. RESULTS: A total of 191 patients, of whom 84 were male (44%) were included. The mean age was 49.9±14.96 (range 18-79). There was a statistically signifi cant difference between the SLAP group (Group 1) and the control group (Group 2) in terms of CSA (p=0.032). The mean CSA was 31.66°±3.51° in Group 1 and 33.57° ±5.01° in Group 2. The cut-off value for CSA in patients with SLAP lesions was calculated as 32.85° and the area under the curve was 0.61, therefore a satisfactory association was observed between the groups. The mean glenoid depth was 4.32 ±1.25 mm in Group 1, and 4.39 ±0.32 mm in Group 2. There was no statistically signifi cant difference between the groups in terms of glenoid depth (p=0.136) and also no association between the glenoid depth and SLAP lesions was observed (cut-off=4.45 mm, AUC=0.32). CONCLUSIONS: Low CSA is associated with SLAP lesions, just as in glenohumeral osteoarthritis. Further prospective clinical studies are needed to enlighten the predisposing effect of CSA to SLAP lesions and the success of superior labral repairs. LEVEL OF EVIDENCE: Retrospective comparative study, Level III.

Clinical and radiological outcomes with an augmented baseplate for superior glenoid wear in reverse shoulder arthroplasty.

Aims: This study aimed to assess the impact of using the metal-augmented glenoid baseplate (AGB) on improving clinical and radiological outcomes, as well as reducing complications, in patients with superior glenoid wear undergoing reverse shoulder arthroplasty (RSA). Methods: From January 2016 to June 2021, out of 235 patients who underwent primary RSA, 24 received a superior-AGB after off-axis reaming (Group A). Subsequently, we conducted propensity score matching in a 1:3 ratio, considering sex, age, follow-up duration, and glenoid wear (superior-inclination and retroversion), and selected 72 well-balanced matched patients who received a standard glenoid baseplate (STB) after eccentric reaming (Group B). Superior-inclination, retroversion, and lateral humeral offset (LHO) were measured to assess preoperative glenoid wear and postoperative correction, as well as to identify any complications. Clinical outcomes were measured at each outpatient visit before and after surgery. Results: There were no significant differences in demographic data and preoperative characteristics between the two groups. Both groups showed significant improvements in patient-reported outcome measures (visual analogue scale for pain, visual analogue scale for function, American Shoulder and Elbow Surgeons, Constant, and Simple Shoulder Test scores) from preoperative to final assessment (p < 0.001). However, AGB showed no additional benefit. Notably, within range of motion, Group B showed significant postoperative decrease in both external rotation and internal rotation, unlike Group A (p = 0.028 and 0.003, respectively). Both groups demonstrated a significant correction of superior-inclination after surgery, while patients in Group B exhibited a significant decrease in LHO postoperatively (p = 0.001). Regarding complications, Group A experienced more acromial stress fractures (3 cases; 12.5%), whereas Group B had a higher occurrence of scapular notching (24 cases; 33.3%) (p = 0.008). Conclusion: Both eccentric reaming with STB and off-axis reaming with AGB are effective methods for addressing superior glenoid wear in RSA, leading to improved clinical outcomes. However, it is important to be aware of the potential risks associated with eccentric reaming, which include excessive bone loss leading to reduced rotation and scapular notching.

Rotator Cuff Tears to Shoulder Instability: The Relationship Between Acromial Morphology and Shoulder Pathology.

¼ The acromion is a well-studied region of the scapula that has demonstrated substantial relationships to various shoulder pathologies.¼ Abnormal acromial morphology is associated with rotator cuff pathology, and our understanding of this risk factor inspired acromioplasty as an adjunctive treatment for rotator cuff tears.¼ The acromion is linked closely to shoulder kinematics and biomechanics, as it serves as the origin for the deltoid muscle.¼ In degenerative shoulder disease, eccentric glenohumeral osteoarthritis has been associated with a higher, flatter acromial roof.¼ Increasing literature is emerging connecting morphology of the acromion with shoulder instability.

In Vivo Analysis of Acromioclavicular Kinematics and Distance During Multiplanar Humeral Elevation.

BACKGROUND: Knowledge of acromioclavicular (AC) joint kinematics and distance may provide insight into the biomechanical function and development of new treatment methods. However, accurate data on in vivo AC kinematics and distance between the clavicle and acromion remain unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to investigate 3-dimensional AC kinematics and distance during arm elevation in abduction, scaption, and forward flexion in a healthy population. It was hypothesized that AC kinematics and distance would vary with the elevation angle and plane of the arm. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 19 shoulders of healthy participants were enrolled. AC kinematics and distance were investigated with a combined dual fluoroscopic imaging system and computed tomography. Rotation and translation of the AC joint were calculated. The AC distance was measured as the minimum distance between the medial border of the acromion and the articular surface of the distal clavicle (ASDC). The minimum distance point (MDP) ratio was defined as the length between the MDP and the posterior edge of the ASDC divided by the anterior-posterior length of the ASDC. AC kinematics and distance between different elevation planes and angles were compared. RESULTS: Progressive internal rotation, upward rotation, and posterior tilt of the AC joint were observed in all elevation planes. The scapula rotated more upward relative to the clavicle in abduction than in scaption (P = .002) and flexion (P = .005). The arm elevation angle significantly affected translation of the AC joint. The acromion translated more laterally and more posteriorly in scaption than in abduction (P < .001). The AC distance decreased from the initial position to 75° in all planes and was significantly greater in flexion (P < .001). The MDP ratio significantly increased with the elevation angle (P < .001). CONCLUSION: Progressive rotation and significant translation of the AC joint were observed in different elevation planes. The AC distance decreased with the elevation angle from the initial position to 75°. The minimum distance between the ASDC and the medial border of the acromion moved anteriorly as the shoulder elevation angle increased. CLINICAL RELEVANCE: These results could serve as benchmark data for future studies aiming to improve the surgical treatment of AC joint abnormalities to restore optimal function.

Editorial Commentary: Lower Trapezius Transfer May Be Indicated for Surgical Management of Massive Irreparable Rotator Cuff Tears in Younger, Non-Arthritic Patients.

Although shoulder rotator cuff repair fixation constructs and suture anchor design have evolved, repair of massive or functionally irreparable tears historically has relied on tendon mobilization and compression, optimizing footprint biology, and attempting a tension-free repair. However, despite these efforts, rates of failure of complete healing may be high, ranging from 20% to 94%. This has led to a search for alternative approaches, including bridging grafts, subacromial balloons, superior capsular reconstructions, biologic tuberoplasties, bursal acromial grafts, and, ultimately, renewed interest in tendon transfers. The latissimus dorsi transfer was traditionally a preferred tendon-transfer technique for posterosuperior massive cuff tears, but inconsistent outcomes have resulted in declining popularity. Recently, the lower trapezius transfer (LTT) has gained acceptance for the treatment of posterosuperior tears, particularly with external rotation weakness and lag signs. The LTT is biomechanically superior to the latissimus dorsi transfer, offering a more native vector of pull and in-phase activation. LTT could be indicated for younger patients with massive cuff tears. However, LTT is relatively contraindicated in patients with cuff tear arthropathy; combined loss of elevation and external rotation; irreparable subscapularis tear; teres minor involvement; and/or those of advanced age or unable to comply with rigid rehabilitation guidelines.

3D C-arm navigated acromioclavicular joint stabilization.

INTRODUCTION: Surgical treatment options for acromioclavicular joint separations are varied. Frequently, suspension devices (SD) are inserted for stabilization under arthroscopic view. This study investigates the feasibility and accuracy of three-dimensional (3D) digital-volume-tomography (DVT) C-arm navigated implantation with regard to the general trend toward increasingly minimally invasive procedures. MATERIALS AND METHODS: The implantation of a TightRope® suture button system (SD) via a navigated vertical drill channel through the clavicle and coracoid was investigated in 10 synthetic shoulder models with a mobile isocentric C-arm image intensifier setup in the usual parasagittal position. Thereby, in addition the placement of an additive horizontal suture cerclage via a navigated drill channel through the acromion was assessed. RESULTS: All vertical drill channels in the Coracoclavicular (CC) direction could be placed in a line centrally through the clavicle and the coracoid base. The horizontal drill channels in the Acromioclavicular (AC) direction ran strictly in the acromion, without affecting the AC joint or lateral clavicle. All SD could be well inserted and anchored. After tensioning and knotting of the system, the application of the horizontal AC cerclage was easily possible. The image quality was good and all relevant structures could be assessed well. CONCLUSION: Intraoperative 3D DVT imaging of the shoulder joint using a mobile isocentric C-arm in the usual parasagittal position to the patient is possible. Likewise, DVT navigated SD implantation at the AC joint in CC and AC direction on a synthetic shoulder model. By combining both methods, the application in vivo could be possible. Further clinical studies on feasibility and comparison with established methods should be performed.

Variability in the distance between the suprascapular notch with the spine of the scapulae and the acromion.

INTRODUCTION: The suprascapular notch lies in the superior border of the scapula and is a passageway for the suprascapular nerve that is sensory to the shoulder joint. Suprascapular nerve block involves injection of local anaesthetic into the suprascapular notch, either ultrasound guided or blind, using the spine of scapula and/or the medial border of the acromion as surface landmarks. AIM: To investigate the anatomic variations that exist between the distance of the notch from the spine of scapula and acromion. METHOD: Ninety-two dry scapulae were measured with a digital calliper for their length of the spine, distance between the midpoint of the spine and base of the suprascapular notch and distance between the medial border of the acromion and the base of the suprascapular notch. These measurements were compared for variations in the scapular bony landmarks, the spine and the acromion to determine the site for the injection. RESULTS: Measurement reliability was assessed by intraclass correlation, Cronbach's alpha being 0.99, 0.97 and 0.91 for length of spine, distance from spine and distance from acromion respectively. The distance from the acromion had less variation in measurement (3.73 ± 0.42 cm) but a flatter distribution when compared to distance from the spine of the scapula (3.32 ± 0.39 cm). CONCLUSION: Length of the spine of the scapula appeared not to influence either distance from the acromion or distance from the spine of scapula. There is potential for greater variability in placement of nerve blocks that use acromion as the bony reference. Key Points • Dry scapular measurement using electronic Vernier callipers is accurate (0.91-0.97). • There is potential for greater variability in placement of blind nerve blocks that use acromion as the bony reference to locate the suprascapular notch.

Changes in the Lateral Acromion Angle in Rotator Cuff Tear Patients with Acromioplasty.

BACKGROUND: Arthroscopic surgery has been established as an efficacious intervention for the treatment of rotator cuff tears. The primary aim of this study was to analyze the modifications in the lateral acromial angle (LAA) subsequent to rotator cuff repair surgery using single-row rivet fixation and double-row rivet fixation techniques. Furthermore, we sought to investigate the influence of LAA on the prognosis of rotator cuff repair surgery. METHOD: This observational study retrospectively enrolled 105 patients diagnosed with degenerative rotator cuff tears who underwent arthroscopic rotator cuff repair between 2016 and 2019. Following the exclusion of two patients with subscapularis or superior labrum anterior and posterior (SLAP) tears, as well as three patients who were lost to follow-up, a cohort of 100 patients was included for clinical and imaging evaluation. Among these individuals, 50 were assigned to the double-row repair group, whereas the remaining 50 comprised the single-row repair group. Bilateral shoulder magnetic resonance imaging (MRI) scans were conducted no less than 24 months post-surgery. Experienced arthroscopic surgeons, blinded to the LAA measurements, assessed the rotator interval (RI) using a control MRI. Functional assessment was performed using the University of California, Los Angeles (UCLA) quick disability of the shoulder and arm, shoulder and hand (qDASH) score. The Wilcoxon signed-rank test for dependent samples was employed to compare data between the pre- and post-intervention groups. Pearson correlation coefficients were calculated to evaluate the relationship between different parameters. RESULTS: The study population consisted of 73 female patients and 27 male patients, with a mean age of 58.32 ± 5.29 years and a mean follow-up duration of 25.88 ± 8.11 months. Preoperatively, the mean LAA was 75.81° ± 11.28°, RI was 4.78 ± 0.62, UCLA score was 17.54 ± 2.44, and qDASH score was 2.45 ± 0.25. The average tear size was 8.95 ± 2.11 mm. A statistically significant difference in LAA was observed between the preoperative and postoperative measurements, with the double-row repair group exhibiting a greater LAA than the single-row repair group. Finally, a significant correlation was identified between LAA, RI, and qDASH scores after a 24-month follow-up period. CONCLUSION: According to our findings, the utilization of double-row rivet fixation has a greater LAA angle than single-row rivet fixation. Moreover, this preservation of LAA is significantly associated with the functional recovery of the shoulder joint.

Giant Cell Tumor of the Acromion: Case Report and Literature Review.

BACKGROUND/AIM: Giant cell tumor of bone (GCTB) is a locally aggressive neoplasm that typically occurs in the ends (epiphyses) of long bones of young adults. Flat bones are uncommon sites of involvement. Herein, we describe an unusual case of pathologically proven GCT of the acromion. CASE REPORT: The patient was a 39-year-old woman with no history of trauma who presented with a 3-month history of right posterior shoulder pain. Physical examination revealed mild swelling and tenderness in the posterior aspect of the right shoulder. Plain radiograph showed a purely lytic lesion, suggestive of a bone tumor. Computed tomography demonstrated an intraosseous lytic lesion with associated cortical thinning and lack of periosteal reaction. On magnetic resonance imaging, the lesion exhibited slightly higher signal intensity compared to skeletal muscle on T1-weighted sequences and heterogeneous high signal intensity on T2-weighted sequences. Strong enhancement was observed following gadolinium administration. The lesion was treated by extensive curettage with adjuvant therapy comprising ethanol and the remaining cavity was filled with polymethylmethacrylate bone cement. Histologically, the lesion was composed of round or spindle-shaped mononuclear cells admixed with numerous osteoclast-like giant cells. Immunohistochemically, the mononuclear neoplastic cells were diffusely positive for H3.3 G34W. The patient was asymptomatic and there was no evidence of local recurrence or distant metastasis 5 months after surgery. CONCLUSION: Although rare, acromial GCTB should be considered in the differential diagnosis of posterior shoulder pain, especially in young and early middle-aged adults.

Mitigating Fracture of the Acromion and Scapular Spine After Reverse Shoulder Arthroplasty: A Critical Analysis Review of Patient and Surgical Risk Factors.

LEVEL OF EVIDENCE: Level V. Narrative Review. See Instructions for Authors for a complete description of levels of evidence.

The role of bone morphology of the greater tuberosity and lateral acromion on subacromial space during scaption: a three-dimensional dynamic simulation analysis.

BACKGROUND: The bone morphology of the greater tuberosity and lateral acromion plays a central role in subacromial impingement syndrome. The critical shoulder angle (CSA) and greater tuberosity angle (GTA) are two-dimensional measurement parameters that have been validated to evaluate it radiologically. These markers are, however, static and don't consider the dynamic effect of glenohumeral motion. OBJECTIVES: This study aimed to better understand the biomechanics in subacromial impingement with a dynamic simulation based on a validated 3D biomechanical model coupling joint kinematics and 3D reconstructed computed tomography. STUDY DESIGN & METHODS: Sixty-one patients were included in this study: a case group of 44 patients with degenerative rotator cuff tears involving only the supraspinatus, and a control group of 17 without a rotator cuff tear. Patients with previous surgeries, traumatic cuff tears, and cuff tear arthropathy were excluded. CSA, GTA, and impingement-free range of motion (IF-ROM) of the glenohumeral joint in scaption were calculated. Correlation tests were used to determine the relationship between ROM and CSA, GTA, and combined CSA and GTA values. RESULTS: CSA and GTA were significantly higher in the rotator cuff tear group (p = 0.001 and < 0.001), while IF-ROM was significantly higher in the control group (p = 0.001). There was no overall correlation between CSA and GTA (R = 0.02, p = 0.8). Individual correlation between both angles with IF-ROM was negatively weak for CSA (R = -0.4, p < 0.001) and negatively moderate for GTA and IF-ROM (R = -0.5, p < 0.001). However, combining both angles resulted in a negatively high correlation with IF-ROM (R = -0.7, p < 0.001). CONCLUSION: Subacromial space narrowing during scaption is highly correlated to the cumulative values of GTA and CSA. These findings suggest that the combined bony morphology of the lateral acromion and greater tuberosity plays an important role in subacromial impingement. LEVEL OF EVIDENCE: III.

Deep learning for automated measurement of CSA related acromion morphological parameters on anteroposterior radiographs.

BACKGROUND: The Critical Shoulder Angle Related Acromion Morphological Parameter (CSA- RAMP) is a valuable tool in the analyzing the etiology of the rotator cuff tears (RCTs). However, its clinical application has been limited by the time-consuming and prone to inter- and intra-user variability of the measurement process. OBJECTIVES: To develop and validate a deep learning algorithm for fully automated assessment of shoulder anteroposterior radiographs associated with RCTs and calculation of CSA-RAMP. METHODS: Retrospective analysis was conducted on radiographs obtained from computed tomography (CT) scans and X-rays performed between 2018 and 2020 at our institution. The development of the system involved the utilization of digitally reconstructed radiographs (DRRs) generated from each CT scan. The system's performance was evaluated by comparing it with manual and semiautomated measurements on two separate test datasets: dataset I (DRRs) and dataset II (X-rays). Standard metrics, including mean average precision (AP), were utilized to assess the segmentation performance. Additionally, the consistency among fully automated, semiautomated, and manual measurements was comprehensively evaluated using the Pearson correlation coefficient and Bland-Altman analysis. RESULTS: A total of 1080 DRRs generated from 120 consecutive CT scans and 159 X-ray films were included in the study. The algorithm demonstrated excellent segmentation performance, with a mean AP of 57.67 and an AP50 of 94.31. Strong inter-group correlations were observed for all CSA-RAMP measurements in both test datasets I (automated versus manual, automated versus semiautomated, and semiautomated versus manual; r = [0.990---0.997], P < 0.001) and dataset II (r = [0.984---0.995], P < 0.001). Bland-Altman analysis revealed low bias for all CSA-RAMP measurements in both test datasets I and II, except for CD (with a maximum bias of 2.49%). CONCLUSIONS: We have successfully developed a fully automated algorithm capable of rapidly and accurately measuring CSA-RAMP on shoulder anteroposterior radiographs. A consistent automated CSA- RAMP measurement system may accelerate powerful and precise studies of disease biology in future large cohorts of RCTs patients.

Correlation of Acromial Morphology With Risk and Direction of Shoulder Instability: An MRI Study.

BACKGROUND: The influence of bony morphology on the development of posterior shoulder instability is not well known. PURPOSE: To determine if acromial morphology, as measured on magnetic resonance imaging (MRI), is associated with posterior or anterior shoulder instability. DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: MRI measurements of posterior acromial coverage (PAC), posterior acromial height (PAH), posterior acromial tilt (PAT), and anterior acromial coverage (AAC) were completed for 3 separate matched groups who underwent surgical intervention: posterior instability, anterior instability, and a comparison group of patients who underwent arthroscopic surgery for snapping scapula. Inclusion criteria were patients with recurrent instability <40 years of age without multidirectional instability, glenoid bone loss >13.5%, or glenoid retroversion >10%. RESULTS: Overall, 37 patients were included in each group. PAC was significantly less in the posterior instability group than in the anterior instability and comparison groups (68.3° vs 88.7° vs 81.7°; P < .001). PAH was significantly greater in the posterior group than in the anterior instability group (11.0 mm vs -0.1 mm; P < .001) and comparison group (0.7 mm; P < .001). There was no difference between the posterior and anterior groups in terms of PAT or AAC (P = .45 and P = .05, respectively). PAT was significantly smaller in the posterior instability group than the comparison group (55.2° vs 62.2°; P = .026). The anterior and comparison groups were not significantly different in PAH or PAT (P = .874 and P = .067, respectively) but were significantly different in AAC (P = .026). CONCLUSION: A higher and flatter posterior acromion, as measured on preoperative MRI, appears to be associated with patients who require arthroscopic capsulolabral repair due to posterior shoulder instability. This information may help clinicians to both diagnose and predict the need for operative intervention for patients with posterior labral tears.

Influence of marker weights optimization on scapular kinematics estimated with a multibody kinematic optimization.

Scapular kinematic estimates are altered by soft tissue artefacts, therefore experimental and numerical methods should be developed to improve their accuracy. This study aimed to assess the influence of weights applied to the scapula markers within a closed-loop multibody kinematic optimization on scapular kinematic estimates. Fifteen healthy volunteers performed static postures mimicking analytical, daily living and sport movements. Scapulo-thoracic angles were computed either from a scapula locator as the reference, or from a closed-loop multibody-kinematic optimization (MKO) including a participant-specific point-on-ellipsoid scapulothoracic joint. Weights applied to scapula markers in the MKO were optimized to minimize the difference in scapular orientation from the reference. Optimizing weighting sets significantly (p < 0.0001) improved scapular orientation from 0.9° to 12.1° in comparison to scapular kinematics estimated with non-optimized weighting sets. The mean optimized weighting set contained no neglectable weight for all markers from the acromion to the medial border of the scapular spine but showed no significant difference (p = 0.547) compared to homogeneous weights. Optimized weighting sets were participant- and movement- specific. To conclude, homogenous weights applied on redundant markers located from acromion to scapular medial border spine are recommended when estimating scapular kinematics in upper limb MKO.

MRI is a Reliable Method for Measurement of Critical Shoulder Angle and Acromial Index / A ressonância magnética é um método confiável para medida do ângulo crítico do ombro e do índice acromial

Abstract Objective The objectives of this study are to compare absolute values of acromial index (AI) and critical shoulder angle (CSA) obtained in both radiographs and magnetic resonance image (MRI) of the shoulder; and to compare the interobserver and intra-observer agreement for AI and CSA values measured in these image modalities. Methods Patients who had medical indication of investigating shoulders conditions through radiographs and MRI were included. Images were taken to two fellowship-trained shoulder surgeons, which conducted measurements of AI and CSA in radiographs and in MRI. Twelve weeks after the first evaluation, a second evaluation was conducted. Inter- and intra-observer reliability was presented as an Intraclass Correlation Coefficient (ICC) and agreement was classified according to Landis & Koch criteria. The differences between two measurements were evaluated using Bland-Altman plots. Results 134 shoulders in 124 subjects were included. Mean intra-observer ICC for CSA in X-rays and in MRI were 0.936 and 0.940, respectively; for AI, 0.908 and 0.022. Mean inter-observer ICC for CSA were 0.892 and 0.752 in X-rays and MRI respectively; for AI, ICC values were 0.849 and 0.685. All individual analysis reached statistical power (p< 0.001). Mean difference for AI values measured in X-rays and in MRI was 0.01 and 0.03 for observers 1 and 2, respectively. Mean difference for CSA values obtained in X-rays and MRI was 0.16 and 0.58 for observers 1 and 2, respectively. Conclusion Both MRI and X-rays provided high intra- and interobserver agreement for measurement of AI and CSA. Absolute values found for AI and CSA were highly correlated in both image modalities. These findings suggest that MRI is a suitable method to measure AI and CSA. Level of Evidence II, Diagnostic Study.

Resumo Objetivo Os objetivos deste estudo foram comparar os valores absolutos do índice acromial (IA) e do ângulo crítico do ombro (ACO) obtidos em radiografias e ressonâncias magnéticas (RM) do ombro e comparar a concordância interobservador e intraobservador dos valores de IA e ACO medidos nessas modalidades de imagem. Métodos Pacientes com indicação médica de investigação de doenças dos ombros por meio de radiografias e RM foram incluídos no estudo. As imagens foram levadas para dois cirurgiões de ombro treinados que realizaram medidas de IA e ACO em radiografias e RM. Doze semanas após a primeira avaliação, uma segunda avaliação foi realizada. A confiabilidade inter e intraobservador foi apresentada como coeficiente de correlação intraclasse (CCI) e a concordância foi classificada segundo os critérios de Landis e Koch. As diferenças entre duas medidas foram avaliadas por meio de gráficos de Bland-Altman. Resultados Cento e trinta e quatro ombros de 124 indivíduos foram incluídos no estudo. O CCI intraobservador médio para ACO em radiografias e RM foi 0,936 e 0,940, respectivamente; para IA, foi 0,908 e 0,022. O CCI interobservador médio para ACO foi 0,892 e 0,752 em radiografias e RM, respectivamente; para IA, os valores de CCI foram 0,849 e 0,685. Todas as análises individuais apresentaram poder estatístico (p < 0,001). A diferença média dos valores de IA em radiografias e RM foi 0,01 e 0,03 para os observadores 1 e 2, respectivamente. A diferença média dos valores de ACO em radiografias e RM foi 0,16 e 0,58 para os observadores 1 e 2, respectivamente. Conclusão Tanto a RM quanto as radiografias tiveram alta concordância intra e interobservador para medida de IA e ACO. Os valores absolutos de IA e ACO foram altamente correlacionados em ambas as modalidades de imagem. Esses achados sugerem que a RM é um método adequado para determinação de IA e ACO. Nível de Evidência II, Estudo Diagnóstico.

Outcomes of conservative treatment of acromial and scapular spine stress fracture post reverse shoulder arthroplasty: a systematic review with meta-analysis.

INTRODUCTION: Acromial and scapular spine stress fractures are common complications post reverse shoulder arthroplasty. A systematic review with meta-analysis was conducted to evaluate the clinical outcomes of conservatively treated acromial and scapular spine stress fractures post reverse shoulder arthroplasty in comparison to nonfracture control. METHODS: Embase, MEDLINE, and Web of Science were searched on September 9, 2022, using various terms related to fracture, acromion, scapula, and reverse shoulder arthroplasty. Meta-analysis using a random effects model was performed on common outcome scores. Risk of bias was assessed using the Joanna Briggs Institute tools for case-controlled studies. Sensitivity analysis was performed for imputed standard deviations and studies with <20 participants. RESULTS: Thirteen studies with a total of 339 fracture and 3142 control patients were included in the systematic review. Meta-analysis was performed on 12 studies assessing active forward flexion, abduction, external rotation, Constant-Murley score, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, pain score, Simple Shoulder Test, and Single Assessment Numeric Evaluation. Fracture patients experienced significantly poorer functional outcome compared with control patients when the fractures were managed conservatively. Levy III fractures tend to experience worse outcomes. Pain score did not demonstrate a statistically significant difference between the fracture and nonfracture cohort. DISCUSSION: Currently, literature regarding surgical management is lacking, partially because of a dearth of high-quality literature but also hindered by a lack of standardized techniques. This review was limited by inclusion of studies of low evidence, small sample sizes, and inconsistency in outcome measurement and follow-up period. Overall, patients with acromial and scapular spine stress fractures treated conservatively are expected to have reduced shoulder function compared to nonfracture patients, with the spine of scapula fracture patients suffering the poorest outcomes. Future studies should aim to use the same sets of outcomes parameters to assess the patients at fixed time intervals and report outcomes stratified by Levy classification. This will enable interinstitutional collaboration and pooling of results.

Effect of Anterior Acromial Coverage on Functional and Radiological Outcomes After Arthroscopic Repair of Anteroposterior Massive Rotator Cuff Tears.

BACKGROUND: Rotator cuff tear size, fatty infiltration, and scapular morphology are correlated with tendon healing and functional outcomes after arthroscopic repair; however, the association between anteroposterior acromial coverage and the clinical outcomes of anteroposterior massive rotator cuff tears (AP-MRCTs; involving all 3 tendons) remains unclear. PURPOSE: To identify the association between AP acromial coverage and functional and radiological outcomes after arthroscopic repair of AP-MRCTs. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A total of 98 patients who underwent arthroscopic repair of AP-MRCTs between January 2015 and December 2020 were included in the study and classified according to whether anterior acromial coverage (AAC) was anterior (46 patients; positive AAC group) or posterior (52 patients; negative AAC group) to the scapular line on true lateral shoulder radiographs. Demographic characteristics, surgical details, and functional outcomes were prospectively collected. Acromial morphological features, global tear extension (GTE), the global fatty infiltration index (GFII), tendon integrity after repair, proximal humeral migration, and glenohumeral abduction were measured and calculated on radiographs or magnetic resonance imaging scans preoperatively and at 2 years postoperatively. Multivariate logistic regression was performed to identify the independent risk factors of a rotator cuff retear. RESULTS: The positive AAC group showed larger AAC, posterior acromial tilt, and anterior acromial slope as well as smaller posterior acromial coverage compared with the negative AAC group. Postoperatively, the American Shoulder and Elbow Surgeons score (82.5 ± 8.3 vs 77.2 ± 11.5, respectively; P = .013), active abduction (157.8°± 27.1° vs 142.7°± 39.6°, respectively; P = .048), and glenohumeral abduction (45.6°± 10.4° vs 39.7°± 14.9°, respectively; P = .041) in the positive AAC group were significantly higher than those in the negative AAC group, while the retear rate (23.9% vs 44.2%, respectively; P = .035) and proximal humeral migration (1.7 ± 1.0 vs 2.3 ± 1.2 mm, respectively; P = .006) were significantly lower in the positive AAC group than in the negative AAC group. Smaller AAC (odds ratio [OR], 0.93 [95% CI, 0.87-1.00]; P = .040), larger GTE (OR, 1.03 [95% CI, 1.01-1.06]; P = .017), and a higher GFII (OR, 3.49 [95% CI, 1.09-11.19]; P = .036) were associated with an increased risk of a rotator cuff retear. CONCLUSION: Increased AAC was associated with a lower retear rate and better functional outcomes after arthroscopic repair of AP-MRCTs. A preliminary risk evaluation integrating GTE, the GFII, and AAC is recommended to consider the necessity of additional procedures for patients in need of arthroscopic rotator cuff repair.

Use of Distal Clavicle Autograft in the Treatment of Os Acromiale Open Reduction Internal Fixation: A Surgical Case Report.

CASE: We present a case of a 21-year-old male patient with a symptomatic os acromiale treated with open reduction internal fixation with distal clavicle autograft. The patient presented with right shoulder pain after a motor vehicle accident with tenderness over the acromion. Radiographs demonstrated an os meso-acromion with corresponding edema on Magnetic Resonance Imaging (MRI). The patient recovered uneventfully with radiographic fusion at 8 months of the os acromiale site. CONCLUSION: This case used the excised distal clavicle as autograft. This technique has the added advantage of harvesting autograft from the same surgical approach and potential mechanical advantage of offloading the os acromiale site to promote healing.

[Treatment of symptomatic pseudarthrosis following acromion fracture with a patient-specific implant customized on a 3D-printed scapula]. / Versorgung symptomatischer Pseudarthrosen nach Akromionfraktur mit patientenspezifisch am 3-D-Modell angepasstem Implantat.

OBJECTIVE: Patient-specific osteosynthesis for pseudarthrosis of the acromion. INDICATIONS: Symptomatic pseudarthrosis of the acromion at the level of a meta/mesacromion. CONTRAINDICATIONS: Infection; patient noncompliance regarding postoperative treatment protocol. SURGICAL TECHNIQUE: Preoperatively, a patient-specific three-dimensional model of the scapula is printed. A locking compression plate (LCP) is individually adapted to this model. Via a dorsal surgical approach over the scapular spine, the pseudarthrosis is refreshed and autologous cancellous bone from the iliac crest is embedded in the fracture zone. This is followed by fixed-angle osteosynthesis with the individualized plate. In addition, tension banding with tapes is performed to reduce the tensile and shear forces on the fracture caused by the muscle. POSTOPERATIVE MANAGEMENT: Consistent wearing of a shoulder-arm brace for 6 weeks postoperatively, active-assisted increase in range of motion for an additional 3 weeks, then gradual increase in weight-bearing and initiation of daily activities without additional weights until 12 weeks postoperatively. RESULTS: Treatment with the presented technique resulted in radiographic consolidation of the fracture and significant improvement in range of motion and pain at the 1­year follow-up.